This is a great product to make installing your Oil Pressure and Oil Temperature senders easy. Made from aluminum, this plate screws on under your oil filter and it has (4) 1/8″ NPT fittings. So, no more drilling and taping holes. Just unscrew your oil filter, screw the plate down in the same manner as you would install your oil filter, and then screw your oil filter back on and install our Oil Pressure or Oil Temperature senders. Comes with 4 plugs, O-ring gasket and instructions. The plate can even be rotated 360 degrees give you the most room to install the senders.
*This plate will make your filter stick out 29mm or 1.15″ more so check if you will have any clearance issues. Some WRX’s will need to bend or trim some heat shielding.
18 x 1.5MM
22 x 1.5MM
3/4 – 16MM
To verify your thread size, refer to WIX Filter Lookup: http://www.wixfilters.com/Lookup/FilterLookup.aspx Choose your car and look for the thread pitch